Before & After Photos

This homeowner in Vernon, CT called us hoping to get opinions regarding his home. He was hoping to talk about both attic and basement insulation. In the attic, he had old fiberglass batts. These were moldy, dirty, and needed to be replaced. 

We were able to help this customer! We were able to replace the attic insulation with TruSoft™ cellulose insulation. We started by removing the old blown-in insulation using a large vacuum. We then went in and air-sealed around all of the points where air leaks up from the home to the attic. We did this using our Zypfoam™ spray foam. Once the atitc is air sealed, we used a long hose to blow in TruSoft™ cellulose insulation. TruSoft™ is amazing -- it does not burn, get moldy, or attract pests. The blown-in insulation fills all gaps and oddly shaped voids. The homeowner is now much more comfortable in his home! 

This homeowner in Wilbraham, MA had issues with freezing pipes and keeping their home warm. They had an insulated, but not quite effective door leading from hatch steps to the outside into the basement that was letting the cold in. There was a foil facing but the door was made of wood and was starting to splinter and deteriorate.

We started by removing the old door and frame. Once we installed updated framing, we installed our insulated door with weather stripping and a locking knob. Outside air will no longer be able to get in, meaning a warmer basement in the winter, and less humidity in the summer.

Thanks to Dr. Energy Saver by Eco Energy Solutions, pipes will no longer freeze and the homeowner will be more comfortable.

This homeowner in Wilbraham, MA called us hoping to talk about his cellulose attic insulation. He did not have enough in his attic, and was hoping we would be able to help him. He had high energy bills and was experiencing energy loss. He specifically did not want to remove and replace his insulation, though -- he wanted to simply add more.

We were able to help this customer with his home. We added insulation value to his home by adding our TruSoft™ cellulose insulation. We used a large hose to blow it into the home. The new insulation "capped" the old insulation, blanketing it and adding R-value.

This customer in Wilbraham, MA called us when he realized he needed new insulation in his basement. After a very detailed evaluation with our Home Comfort Specialist, they decided that using spray foam in the rim joist would be the best option.

This homeowner already had fiberglass batts in the rim joist. Fiberglass is a notoriously bad insulation. It's prone to falling down or sagging, letting air leak in, and being comfortable as bedding for pests such as rodents.

We immediately removed the fiberglass insulation from the rim joist. We then went back in with two part expanding spray foam, installed on the rim joist and the sill plate. This goes into every crack, gap, and joint to make sure that there are no air leaks. 

This homeowner originally called us hoping that we would be able to help him with insulating his new home. When we arrived at the home to go over his concerns and comfort level, he stated that he had an inadequate sump pump and did not know if we were able to take care of that. Of course, we told him YES, we do sump pumps! 

We helped this homeowner by installing one of our SuperSump™ sump pump systems. This system features a 1/3 hp cast iron pump which can discharge up to 2200 gallons per hour, 8 feet high. It even features a WaterWatch™ alarm system that will alert the homeowner if the pump were to fail. Now, this homeowner can rest easy knowing that their basement is adequately protected.