Before & After Photos

Our homeowner noticed a dark coloration on the boards in his attic and called us to check for mold. He also mentioned his attic had poor ventilation. After our inspection was competed there was clearly mold. We also gave a price to re-insulate which the customer wanted for his HVAC never turns off when the weather is super hot or cold. We used Mold X2 and Mold X2 Botanical products and cleared soffits of debris and insulation then added new rafter baffles to correct. Once all insulation was removed we air sealed and added Cellulose. Our customer was happy his HVAC wasn't on all the time. 

The homeowner explained that he had noticed dark discoloration all over his roof sheathing inside the attic. He had mentioned that his attic was poorly ventilated from the beginning of the build that it needed to be corrected. The symptoms of the problem were high humidity in the attic along with zero airflow. 

The sheathing in our customers attic was very severe, very visible and all due to improper ventilation.  There are different types of ventilation that work together to take air in and let air flow out, if any part of the air flow process isn't working then the attic won't breath and moisture can begin to create mold.  Here we were able to correct the ventilation, spray treat the mold and since we were there, the customer wanted to air seal the attic floor as well as insulate with blown-in cellulose.  Now the home is mold-free, the attic breathing appropriately and with the air sealing and insulation will be energy efficient!

After a home inspection mold was established and needed remediation.  Our company was called in to clean the attic.  We use a product called RMR-86 and RMR-141 to clean the stain and mold. New durovent baffles were used for proper ventilation once the soffits were cleared of debris.

Homeowner called for mold remediation, after inspection also found bath fan ducting needed upgraded to a energy thermal duct along with new duel baffles for proper attic ventilation.