Before & After Photos

This homeowner in Webster, MA reached out to us about his home comfort issues. He wanted to address the drafts he was experiencing. The Home Comfort Specialist who came out to his home found that the crawl space under the home was moldy and had damaged insulation. Additionally, the crawl space had a water issue.

We were able to help this customer! One of the solutions we utilized was our CleanSpace™ crawl space encapsulation system. We first insulated the walls using our SilverGlo™ foam insulation. For the floor, we added a dimpled drainage mat to create a thermal break. We then installed TerraBlock™ floor insulation on top of that. Then, we installed a CleanSpace™ crawl space encapsulation liner over that insulation. We fastened it into both the walls and floor to create a permanent solution for this crawl space. We then added two-part expanding spray foam to the rim joist to ensure that the crawl space was covered. This encapsulation system works seamlessly with our TripleSafe™ sump pump and SuperSump™ sump pump - keeping his crawl space dry, too! Combined with our other solutions, this homeowner will experience less drafts, warmer floors, lower energy bills, and a much more comfortable home! 

This homeowner in Webster, MA reached out to us due to drafts he was experiencing. He wanted to get the weatherstripping replaced on his doors, as he believed that that was the cause of his drafts. When our Home Comfort Specialist came out to the home, he found that one cause for his drafts was his inadequate insulation. When the Home Comfort Specialist went into the homeowner's crawl space, he noted that the insulation had begun to sag and fall, and there was a humidity issue causing mold.

We were able to help this customer! One of the solutions we utilized was our CleanSpace™ crawl space encapsulation system. We first insulated the walls using our SilverGlo™ foam insulation. For the floor, we added a dimpled drainage mat to create a thermal break. We then installed TerraBlock™ floor insulation on top of that. Then, we installed a CleanSpace™ crawl space encapsulation liner over that insulation. We fastened it into both the walls and floor to create a permanent solution for this crawl space. We then added two-part expanding spray foam to the rim joist to ensure that the crawl space was covered. Combined with our other solutions, this homeowner will experience less drafts, warmer floors, lower energy bills, and a much more comfortable home! 

This homeowner in Otis, MA needed a new window in order to ensure that he would have a secondary way to get out of his basement in case of emergency. Unfortunately, there was not a pre-existing window in the basement, as is often the case. Additionally, there was not a straightforward spot to put the window due to the terrain around the home.

Luckily, Fogarty's was able to identify a spot that the window would be able to go into. We then marked off where the mini-excavator should remove dirt, rocks, and other material from around the space. We then measured out and marked where the window would ideally go. We found that putting the window in the closet would be the best spot, and marked that part of the drywall and tore it out.  On the outside, we prepped and cut the foundation so that it would fit the egress window. We then framed the window and installed it. Once we finished that, we were able to install the window well around it. The homeowner and his family loved the window, and their basement will stay safe and comfortable for years to come! 

This customer contacted Fogarty's Home Services for help with her unfinished basement. She wanted to have our team create a nice, well-insulated "man cave" for her husband. The house had been recently purchased, and our customer wanted to ensure that her husband had a finished space to call his own. The insulation in the basement was in need of replacement. The walls themselves were not insulated at all, and were simply poured concrete. This made the basement very cold in the winter. In the summer, the warm and humid air created condensation on the walls, which caused mold in some of the insulation.

In order to ensure that the entire basement was sealed and protected, we installed Foamax™ boards around the entirety of the basement. These boards are installed with Dr. Energy Saver's proprietary Foam-Tite fasteners. We also sealed the rim joist with spray foam insulation.   The end result is lower energy bills and a warm, comfortable basement for the customer that is ready for transformation into that 'man cave'.

This homeowner in Great Barrington, MA reached out to us asking about basement renovation. She was looking to get her basement finished - they mostly used it as a play room and storage at the time. She was looking to create a finished basement with a large play room, two offices (one small and one medium sized), and a half bathroom. When our Home Comfort Specialist came out to the home, he evaluated the basement to help the homeowner create the perfect floor plan. The homeowner decided to go with a full bathroom, but otherwise, she decided to bring her original vision to life.

We were able to help this customer! We first demolished and removed what was in the basement -- including removing the old insulation. We then re-insulated the basement. We built out the framing, installed the electrical and plumbing, and then added our brand new gray Everlast™ wall panels. We finished the stairs as well. We then installed our ThermalDry™ elite plank flooring in the color "pecan". We then completed the bathroom, adding a toilet, shower, and sink. We added a drop ceiling and ceiling lights. As it was a walk out basement, it had full sized windows and a door. We replaced the door with a better insulated door. We put on the finishing touches, and we were done! Now, this homeowner is so excited to have a beautiful new basement!