Before & After Photos

A new customer in Summit NJ, who found us online on Home Advisor inquired about Pipe Works Services because they had a leak that they thought was from the toilet above a drop ceiling. Pipe Works Services technician Pedro was able to look into the situation and confirmed toilet on the first floor was leaking into the basement. Pedro took the toilet off and replaced the water wax seal... Pedro installed the toilet back and checked for leaks and could not find any. Pedro left the toilet working and he also replaced the flapper in master bathroom toilet as a courtesy. Now, this customer is happy with no leaks inside the walls from the toilet.

Customer in Butler, NJ experiencing a clog in a backyard drain. Our tecnician camera inspected the line and cleared the clog by jetting the line. 

Our technicians applied spray foam the rim joist to seal and insulate the crawl space. They also installed SilverGlo rigid foam board between the Joist above the sill plate on the buffered wall, sealing air-tight with one part foam. This will help to insulate the area under the home and keep moisture and bad air out of the home.

Our technician Pablo was out on a Saturday leaking boiler situation. After his assessments and recommendations, the homeowner wanted to have replacement options based on the age of the unit and other factors. We sent our system design specialist, John, that same Saturday for the homeowner.  We replaced the boiler with an NTI boiler, relocated, repiped and mounted it to the wall. We also replaced their storage tank and installed a water softener to help with their extremely hard water in the home. 

We recently responded to a commercial insulation inquiry for a local law firm experiencing discomfort in the offices even though the heating and cooling system was running. Our System Design Specialist went to the office and after viewing the large duct work Lloyd recommended spray foam to encapsulate the ducts. The spray foam will seal any cracks or holes and keep the ducts from excessive temperatures.

Our technicians Pablo and Jorge arrived at the job site and started prepping by covering the floor from the kitchen door to the attic, and then proceeded to encapsulate the duct system in the attic with 1 inch polyurethane spray foam. Additionally they applied an ignition barrier and the job was completed. They cleaned thoroughly and vacuumed the floors making sure everything was clean before leaving the job.