Before & After Photos

Air leaks in this attic space allowed outside air into the home and caused drafts. This home in White Plains, Maryland was suffering from major attic air leaks and inadequate attic insulation (as shown in the picture). Our installation crews air sealed all the cracks in the attic and added blown-in cellulose insulation to prevent further air leaks and pests that might get into the home!

This Home in White Plains was struggling to keep warm in the winter and stay cool in the summer. After Complete Home Solutions ran multiple tests including a Blower Door Test, the results showed that the home was leaking air at an alarming rate and the fiberglass insulation in the attic was old and not effective. To fix this problem the Production Crew had to first Air Seal all the top plates, light fixtures, and cracks to reduce any air from leaking out of the house through the attic. After the Air Sealing, the attic had to be then filled with Blown-in Cellulose Insulation until it reached the appropriate level for this region (R-Value of R-49). The combination of air sealing and the cellulose insulation dropped the customers utility bills drastically and made the home much more comfortable.

These homeowners were very happy that they had this analysis performed and had the air leakage problems fixed!

This homeowner was experiencing a lot of home comfort issues: drafty rooms, hot & humid summers, cold winters, etc. These issues mainly stemmed from a couple of problem areas in the attic. Firstly, it wasn't air sealed and was under insulated. Secondly, the insulation that was being used around the duct work was spotty and deteriorating. This really explains the issues that the homeowner was having. 

We corrected the first problem by caulking all along the floor boards and applying blown in cellulose insulation. We corrected the second problem by installing SilverGlo foam board all around the duct work and sealing it off with caulk. Goodbye uncomfortable rooms and hello affordable utility bills!

This homeowner noticed that he didn't have a lot of insulation in his attic and knew that it must have been affecting his home's comfort. He asked Complete Home Solutions to come take a look and see if there was anything else that could be done to make his attic more energy efficient. 

We sent out one of our home comfort specialists to take a look. He found that the attic could've, indeed, used more insulation but it also could've used some serious air sealing. This involved us installing spray foam insulation and caulk around penetrations and cavities (such as ceiling fixture penetrations) in order to prevent air leakage. We also provided a few other smaller solutions to complete the effect. Ultimately, this homeowner gained a more comfortable, less expensive house. 

Check out this new A/C system in White Plain, MD! Evlyn called Complete Home Solutions when his heat pump finally bit the dust. After an examination from one of our trained HVAC technicians, it was determined that the best course of action was a full system replacement. Our Install team was able to replace this old system with a brand new Ruud heat pump. This swam will not only make Evlyn's house more comfortable but also save him some money on his monthly utility bills with the efficiency of the new system. If you are concerned about your heating and cooling system, give us a call today at 1-866-632-5870!